Sharp Shooter
Threaded & Chambered Barrels

We are proud to announce that we are now using Brux Barrels as our main supplier of blanks. Brux barrels are single point cut rifled, with 4 grooves and double hand lapped. They represent the best value and accuracy for your Savage rifle. Many new records have been set with Brux barrels over the last few years, and we have many satisfied customers. We are very satisfied with the finish, inside and out, and especially the accuracy.
Standard blanks can be up to 30” long, and longer blanks at an additional $10.00 per inch.
We offer 2 standard contours for the Savage rifle:
TARGET contour, for large shank actions…1.125” @ breech straight taper to 1.00” @muzzle.
VARMINT contour, for standard shanks…1.055” @ breech, straight taper to .820” @ muzzle.
Twist rates: Brux can cut any twist rate between 1-4 to 1-43, in increments of 1/10th of an inch. We will stock the most popular twist rates depending on what is common at the time .If we don’t have that blank on the shelf, it can be cut per customer order. Douglas barrels for .17 and .20cal are limited to the twist rates shown below.
All barrels are fully chambered and threaded for Savage rifles, standard or large shank and are finished with a customer choice of either a 320 grit polish or bead blasted matte.
Additional Notes:
We will also finish blanks from other manufacturers if provided by the customer (we will not order it for you).
We will also chamber for cartridges not listed below if the customer supplies the reamer.
Standard delivery time for barrels is 10-12 weeks.
Brux Barrels Start at
$405.00 (.22cal and up)
Douglas Barrels start at $340.00 (.17 and .20cal Only)
|
.17 Caliber (.172")
|
Stocked Twist Rates:
|
.20 Caliber (.204")
|
Stocked Twist Rates:
|
.22 Caliber (.224")
|
Stocked Twist Rates:
|
6mm Calibers (.243")
|
Stocked Twist Rates:
|
.25 Caliber (.257")
|
Stocked Twist Rates:
|
6.5mm Calibers (.264")
|
Stocked Twist Rates:
|
7mm Calibers (.277")
|
Stocked Twist Rates:
|
.30 Calibers (.308")
|
Stocked Twist Rates:
|
All of the above are our standard barrels. We can special order different lengths and we will also contour to your needs. (additional fees may apply)