| DAVIDSON 1/2" x 60°
DOVETAIL BASES The Davidson 1/2" x 60º Mounting Rail dovetail is parallel over its entire length to optimize mounting your Davidson style scope rings. Accuracy from the dovetail to the action top is also less than .002 inch to minimize windage correction right out of the box. Both ends of the mount are chamfered slightly on a 30° angle to let the sharp corners of the mating rings align themselves without binding. The 60º dovetails are machined +/- .001 and measured over (2) optimum diameter pins to minimize over clamping of your rings. Bases are available in your choice of Standard 0 MOA & Tapered 20 MOA to reach out there with minimum knob adjustment. They're machined from #7075-T6 Aluminum for more strength and durability than the so-called 'Aircraft Aluminum' fabricated by some other manufacturers. And, at less than 2 oz., benchrest shooters will have less weight to chase! Zero MOA Davidson Base
= $75.00 |
|
| PICATINNY M1913-A BASES The Picatinny Mounting Rail offered by Bench-Source has (14) Cross Slots symmetrically spaced to facilitate any scope tube length. When mounting your favorite ring style, slots are spaced to give the user optimum adjustment for eye relief and shooting comfort. Height of the base is approximately .610 inches tall. Parallelism is held less than .002 inch between the dovetail clamping area and top of the receiver after mounting. Bases are available in your choice of Standard 0 MOA & Tapered 20 MOA to reach out there with minimum knob adjustment. They're machined from #7075-T6 Aluminum for more strength and durability than the so-called 'Aircraft Aluminum' fabricated by some other manufacturers. Picatinny Rail will accept all the popular inverted dovetail rings such as Burris, Weaver & Leupold. And, at less than 2 oz., benchrest shooters will have less weight to chase! Zero MOA Picatinney Base = $75.00 |
|
