Signature Rings utilize Pos-Align Offset Inserts so you can virtually sight-in your gun without moving the scope adjustments. Lens systems perform at their optimum when all lenses are optically centered. By keeping the internal optics centered, you'll see through the scope all of the clarity, sharpness, and brightness that the optics designers intended for you to see. The offset inserts also correct for any mis-alignment caused by receiver holes drilled off center, or the bases or rings being slightly off perfect center. And for you 1,000 yard and other long range shooters, the need for expensive tapered bases or shimming becomes a hassle and expense of the past.

1" Matte Rings:           $49.00
1" Silver Rings:           $49.00
30mm Matte Rings:     $49.00

These offset inserts work only in Burris Signature Zee Rings. One insert half is slightly thicker and the other slightly thinner than standard. Swapping the standard inserts with a pair of offset inserts will move the point of impact approximately 5" at 100 yards for the .005 inserts, 10" for the .010 and 20" for the .020. This will allow a gun to be sighted in that cannot be zeroed with the available windage and elevation adjustments in the scope.

Kit has 1 each of +/- .005", +/- .010", and +/- .020" inserts

Price:     $15.00